Edger Comparison

Comparison of Accubrush Models

Accubrush MX Accubrush XT
Picture Accubrush MX Edger Accubrush XT Edger
Pole Handheld Use Only.
Not pole mountable.
Mounting the XT to a poleHandheld or Pole Mountable. Fits any standard paint pole.
Handle

MX Handle is Fixed

MX Handle is fixed and does not swivel

XT Swivel JointXT handle swivels on specially-designed U-Joint.
Ceilings Painting Ceiling with MX EdgerFast along ceilings.
The Accubrush is much faster and more accurate than cutting in manually with a brush, and is much less tiring than trying to cut in paint along the top of the wall by hand.Note that using the MX still requires ladder to be able to reach the top of the wall, and getting up and down the ladder, and moving it, can still be time-consuming.
Painting the top of the wall with the XTLightning fast along ceilings!
Keep your feet on the ground while edging the top of the wall with the XT Pole Mountable Edger! This is not only safer, but much faster than cutting in by hand, or with the MX Edger.With the pole-mountable unit, you can easily cut in ten linear feet in less than a minute!
Design Designed primarily as an economical unit for the DIY homeowner who has one or two houses to paint. Designed for the professional with multiple houses to paint.
However, while it was designed for the professional, it is also very popular with homeowners who are looking for a rugged, high-performance unit.
Shield MX ShieldAll plastic construction. After painting several houses, the bottom of the shield will wear down to the point where the edger will need to be replaced. This was an issue that was discovered by contractors when the MX was first released. It wasn’t a huge problem since the MX will easily pay for itself in the first room for most professional painting contractors. However, this issue was addressed when the XT as designed. Metal guard on XT ShieldThe bottom of the shield on the XT has been replaced with a spring-loaded metal shield, which provides greater wear resistance and virtually eliminates any concern about the edger wearing out.
Guide MX ShieldThe guide that glides against the trim will also wear down over time on the MX after painting multiple houses. XT Front WheelThe guide on the XT has been replaced with a roller, which virtually eliminates the issue of the guide wearing down over time.
Wheels Rear wheel of MX EdgerThe side of the wheel housing on the MX edger will also wear down over time after painting multiple houses. The wear on this surface can be accelerated when painting along very rough textured walls. XT Edger Rear WheelThe XT incorporates a roller which virtually eliminates the issue of the housing on the MX wearing down over time. The roller also allows the XT to glide freely across a wide variety of textures, which means faster painting on textured walls.
Price USA Base Price $24.95 USD.
Price varies outside of the USA.
USA Base Price $99.95 USD.
Price varies outside of the USA.